Acrylic Putty

DIRECTIONS FOR USE

Ensure the surface is clean & free from loose impediments or particles prior to application of Swagat ACRYLIC WALL PUTTY sand the surface with emery paper 180 and wipe clean. All dents and surface imperfections should be filled up with Swagat Acrylic Wall Putty prior to the application of the final paint. Each coat of the putty should be allowed 6-8 hours of drying time. Ensure that each time a layer of putty is applied it should be dry cut using a fine emery paper and should be followed by application Swagat Cement Primer to seal the pores.

Once the surface is properly labeled and primed proceed with the application of the final finish.