Enamels

MONALISA High Gloss Premium PU Synthetic Enamel is formulated on high-quality alkyd resins suitably modified to give excellent durability, high gloss, and a good hold out with a fast drying time. It is suitable for wood, metal, and masonry surfaces.

Direction for Use

• The Substrate must be sound, clean, dry, and free from dust, oil, grease, etc.
• Lightly sand the substrate with emery paper before application.
• Depending on the substrate on which the application is to be done, ensure that it is primed with a suitable primer before application of MONALISA Hi-Gloss Premium PU Synthetic Enamel.
• Wooden Substrate: Prime with Monalisa Wood Primer.
• Metal Substrate: Prime with Monalisa AC Red Oxide Metal Primer.
• Masonry Substrate: Prime with Monalisa Cement Primer.
• Monalisa Hi-gloss Premium PU Synthetic Enamel can be thinned using good quality Mineral Turpentine Oil (MTO), maximum 5-8% by volume.
• Two to three coats are recommended for the best finish. For dark shades, 3 coats are advised for complete opacity.
• Ensure that each coat is fully dry before application of the next coat. Depending on the temperature and relative humidity, it is advisable to allow each coat to dry overnight before re-coating.