Product Description
READY TO USE SHRINK-FREE ACRYLIC CRACK FILLER FOR INTERIOR & EXTERIOR SURFACE CRACKS IN PLASTER
Descriptions for Use
AREAS OF APPLICATION
Internal & External Plastered brick masonry wall cracks of up to 5 mm width
METHOD OF APPLICATION
- The surface must be free from all loose particles, dust, oil, and grease, etc. Moisten the
surface using a damp cloth before applying SWAG ATR CRACK-N-SEAL PASTE.
- Finehairlinecracksmustbeopenedupto1
- For filling SWAGATfi CRACK-N-SEAL PAS”fE on the internal surface, existing POP or Wall Putty must be removed till the plaster surface is exposed.
- For porous surfaces, apply primercoatpreparedwithSWAGATfiCRACK-N-SEAL PASTEandwaterin1:1proportionoverthecrack.FillSWAGATfiCRACK-N- SEAL PASTE when the surface is still tacky.
- Press SWAG ATR CRACK-N-SEAL PASTE firm ly into the crack with a spatula or putty knives and level with the surface.
- Care must be taken to avoid the formation of cavities or bubbles during application.
- Allow it to sit for 24 hours and then apply another coat of SWAGATG CRACK-N- SEALPASTE.
- FurtherSwagatfiWallPutty(CementBased)application can be taken upon ceitis
full j dry.
- For best result allow SWAGATfi CRACK-N-SEA 1. PASTE to cure for 7days.
Product characteristics
Colour: Off White (Can be tinted with Universal Steiners)
Coverage: 60-80 sq.ft/kg approx. Depends on the width of the crack.
Flash Point: N/A
Dryin3 Time: Touch-first; Recoat-24hrs
Finish: Matt
Vehicle Type: Pure Acrylic Polymers
Specific Gravity: 1.4+/-0.1
Application: By Brush or Putty Blade. No Dilution with water
Packing: 500 km & 1 kg
Reviews
There are no reviews yet.